How To Remove Scratch From Stainless Steel Sink

Remove-Scratch-From-Stainless-Steel-SinkStainless steel has always been a favorite of homeowners, especially when it comes to the kitchen sink. The sleek design and mirror finish adds a pristine look in the kitchen. Nonetheless, the stainless steel, despite all its hardness, is vulnerable to scratches- minor and deeper.

And a dull, scratchy stainless steel can become somewhat eyesore for you. Thus, you need to know how to remove the scratch from the stainless steel sink.

Fortunately, the scratch removal process from the kitchen steel sink doesn’t require any rocket science. With little effort and a few things, you can shortly get back the pristine look of the sink.

Here, we go.

How To Remove Scratch From Stainless Steel Sink

Stainless steel sinks come with a natural grain. When you carefully look at the sink, you should find some brush marks on it. These are the grains we are talking about.

So, when you remove scratches from stainless steel sink, the rubbing should go in the same direction of these grains. Otherwise, you may end up hurting the sink more.

The precaution being said, let’s move on to the scratch removal process from the stainless steel sink. However, there are two kinds of scratch that might affect the stainless-steel sink. These are:

  • Fine scratches
  • Deep scratches

We will be discussing both scratches removing steps. But first, you should collect the essential things to wipe out the scratches.

These things are:

  • Scratch removal compound
  • Scratch removal kit
  • Water
  • Microfiber cloth

Removing Fine Scratches from the Sink

When you want to clean the fine scratches from the sink, you will need a nonabrasive scratch removal compound. You can use Copper Cleaner or Bar Keeper’s Friend.

However, if you don’t want to spend much or at all, the toothpaste you use at home will do the trick for you. WOW!

Step 1: Applying the scratch removal compound

For powdered scratch removal from the stainless-steel sink, you should add enough water. Start dripping a few drops of water at a time. It will create a thick paste right on the scratchy surface.

Nonetheless, if you are going to use a creamy compound, you can leave out the water since these materials are already in a toothpaste-like condition.

Step 2: Rubbing the scratched area

Now, take the small microfiber cloth and apply the same compound to remove a scratch on it. Then wait for some time to permit the paste work on scratch (roughly 10-20 seconds).

After that, start rubbing the microfiber cloth on the sink surface back and forth. Remember, you have to rub the microfiber cloth in the same direction of the stainless-steel sink grain. You must be very ardently careful about it.

Step 3: Giving a final clean-up

Once the scratch is gone, take another clean microfiber cloth to wipe off any residue of the compounds. You can use water for the cleaning process or dampen the microfiber.

Then, gently dry the sink using a dry cloth.

Note: You may need to continue Step 2 and Step 3 if there’s more scratch.

Removing Deep Scratch from the Sink

If the sink scratches are too large to remove with the removal compounds, you may require to use the specialized scratch removal kit.

So, for removing scratches from stainless steel sinks, especially the deep scratches, you may use Cookware Scratch Remover or Scratch B-Gone Removal Kit. Both compound kits work brilliantly.

Note that the removal kits contain a stainless steel polishing compound along with the abrasive pads to remove the former scratches. The grit changes from corset to the finest throughout the process. However, to restore the shine of the sink follows the user guideline of the removal kit.

Step 1: The Preparation

It is a pretty simple step. Just read and thoroughly understand the user manual of the removal kit. Also, find out the direction of the steel grain on the kitchen surface.

Step 2: Rubbing the scratch with the grit

Choose the right grit according to the user manual. Now start rubbing the scratched area with the grit paper. Since the grits are abrasive pads, you should avoid the back and forth rubbing. Instead, always rub the surface in the same direction.

You don’t need to apply extreme pressure. Simply put, the necessary strength and do the rubbing with patience.

Step 3: Changing the grits

Some manufacturers recommend using finer grits after the use of the harder grits. If this is the ardent case with your stainless-steel sink, choose the other grit with more delicate characteristics.

Additionally, you may need to add water or other compounds (if recommended in the user manual).

Step 4:  Cleaning the sink

Now use a dampened microfiber cloth to wipe out the remaining impurities from the sink. You should get a scratch-free shiny sink. Magic!

The Bottom Line

The methods for removing scratches from stainless steel sinks are straightforward and inexpensive. Still, we recommend you to maintain the sink with care to avoid the scratch removal process from time to time.

You should avoid using steel wool and abrasive cleaning substances to wash the stainless steel sink. You can also use a rubber dish mat while cleaning the heavy dishes on the sink. It protects the sink surface from those unwanted scratches.

Leave a Reply

Your email address will not be published.